¾«¶«´«Ã½app

QTAC code (Australian and New Zealand applicants): Toowoomba campus: 907342; External: 907345

CRICOS code (International applicants): 079516G

Notes

See note on part-time study below within Admission requirements.

Back to top

Contact us

Back to top

Professional accreditation

A graduate of this program is eligible to apply for membership of Engineers Australia as a graduate Engineer. After further professional development, a graduate member with a Bachelor of Engineering (Honours) may apply for chartered status as a Professional Engineer and, when granted, may use the post-nominal MIEAust CPEng.

The Bachelor of Engineering (Honours) program is accredited by Engineers Australia and, through an agreement reached between the professional engineering bodies of other countries (the Washington Accord), is also recognised in the United Kingdom, the Unites States of America, Canada, Ireland, Hong Kong, New Zealand and South Africa.

Back to top

Program aims

This combination of an Engineering program with a program in Business provides students with the opportunity to become qualified Engineers with a strong background in business principles and practice. There is an increasing need for engineering graduates to have business qualifications early in their career as they are often required to manage complex projects with both tight schedules and budgets. In some sectors of the industry a business qualification can be one of the criteria for promotion. Many engineers have completed a Master of Business Administration to satisfy this requirement. This program enables students to obtain qualifications in both disciplines at the same time.

The program offers students a high level of flexibility as they are able to choose wide ranging combinations of an engineering major and a business major that best suits their career aspirations.

For more details of the two programs that comprise this award, applicants are asked to refer to the Bachelor of Business and Bachelor of Engineering (Honours) sections of this Handbook.

Back to top

Program objectives

Graduates of the Bachelor of Engineering (Honours) and Bachelor of Business program will have met the separate objectives of the Bachelor of Engineering (Honours) and the Bachelor of Business programs.

Back to top

Australian Qualifications Framework

The Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualifications offered by higher education institutions (including universities), vocational education and training institutions and secondary schools. Each AQF qualification has a set of descriptors which define the type and complexity of knowledge, skills and application of knowledge and skills that a graduate who has been awarded that qualification has attained, and the typical volume of learning associated with that qualification type.

This program is at AQF Qualification Level 08. Graduates at this level will have advanced knowledge and skills for professional or highly skilled work and/or further learning.

The full set of levels criteria and qualification type descriptors can be found by visiting .

Back to top

Admission requirements

Applicants shall normally:

• have studied four semester units and achieved an exit assessment of 'Sound Achievement' or better in each of the following Queensland Senior Secondary School subjects: English and Mathematics B. It is recommended that applicants should also have satisfactorily completed the subject: Physics, or

• be able to demonstrate that they have achieved an equivalent standard in these subjects at another institution, and

• Australian applicants: have achieved a Queensland Overall Position (OP) band, or an equivalent Rank based on qualifications and previous work experience, at or above the specified cut-off level

Applicants should ensure they are able to complete this program within the maximum duration of eight years. To achieve this, students will need to complete a minimum of 5 units of study per year or be eligible for 16 units of credit.

All students are required to satisfy the applicable .

If you do not meet the English language requirements you may apply to study a ¾«¶«´«Ã½app-approved . On successful completion of the English language program, you may be admitted to an award program.

Back to top

Program fees

Commonwealth supported place

A Commonwealth supported place is where the Australian Government makes a contribution towards the cost of your higher education and you as a student pay a , which varies depending on the courses undertaken. You are able to calculate the fees for a particular course via the .
Commonwealth Supported students may be eligible to defer their fees through a Government loan called .

Domestic full fee paying place

Domestic full fee paying places are funded entirely through the full fees paid by the student. Full fees vary depending on the courses that are taken. You are able to calculate the fees for a particular course via the
Domestic full fee paying students may be eligible to defer their fees through a Government loan called provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealand citizens who will be resident outside Australia for the duration of their program pay full tuition fees and are not eligible for .

International full fee paying place

International students pay full fees. Full fees vary depending on the courses that are taken and whether they are studied on-campus, via distance education/online. You are able to calculate the fees for a particular course via the .

Back to top

Program structure

The program involves five years of full-time study.

Students may apply for admission to study part-time or by distance education however applicants should ensure they are able to complete this program within the maximum duration of eight years. To achieve this, students will need to complete a minimum of 5 units of study per year or be eligible for 16 units of credit.

The combined Bachelor of Engineering (Honours) and Bachelor of Business degree is a 40 unit program consisting of Academic courses and Practice courses.

Academic courses are normally one-unit courses that involve approximately 155 hours of student work per unit.

The components of the program are shown in the following table:

Back to top

Required time limits

Full-time students have a maximum of seven years to complete this program. Part-time or distance education students have a maximum of eight years to complete this program.
A pro-rata adjustment of the maximum time period will apply for those students who transfer from one mode of study to another. A pro-rata reduction in the maximum time period will apply to students who are admitted to a program with advanced standing.

Back to top

Core courses

The courses that comprise the core studies program are shown in the following table:

When compared to the Core Studies program in the Bachelor of Engineering (Honours) program the following changes have been made:

• the following courses have been deleted from the program: , and

• five courses from the Bachelor of Business have been added to the program.

Back to top

Major studies

Engineering majors

An Engineering major study provides students with knowledge and skills in a particular engineering discipline. Students must select one of the following majors as their Engineering major.

The courses in each of the Engineering majors are listed in the Bachelor of Engineering (Honours) section of this Handbook. Students enrolled in the Bachelor of Engineering (Honours) and Bachelor of Business program only study 17 of the 20 courses listed in an Engineering major.

Of the 20 courses listed for each major, the three courses that are not required are:

Students should select any remaining Electives from the appropriate list for their engineering major.

Business majors

Students must select a business major from one of the following eight-unit majors:

Note: With the permission of the Faculty of Health, Engineering and Sciences, students may select an alternative major from the Bachelor of Business or the Bachelor of Commerce. The eight courses that comprise each of the business majors are listed in the relevant sections of this Handbook.

Back to top

Practical experience

To be eligible to graduate from the Bachelor of Engineering (Honours), students must obtain an aggregate of at least 60 days of suitable work experience during their program. This experience may be in an engineering office or laboratory where the student would be working principally with professional engineers and engineering associates. It may, however, be preferable for students to spend some time in field or factory activities to gain insight into industrial practice and to see what is involved in converting designs into finished products. Students are required to enrol in in the latter part of their program and keep a record of appropriate experience as specified in the Course Specification. The work experience is to be endorsed by an appropriate person in the organisation providing the experience and submitted to the examiner. The student must meet all costs associated with the acquisition of work experience to satisfy this requirement. The record of work experience must be made available for perusal by the Faculty of Health, Engineering and Sciences upon request. The acceptability or otherwise of employment experience, and the period of that type of experience that may be credited towards the 60 days, will be determined by the Examiner of .

Back to top

IT requirements

Access to an up-to-date computer is necessary. On-campus students can access appropriately equipped laboratories, but should consider acquisition of their own computer. External students should be able to access a computer with the following as advised by the ¾«¶«´«Ã½app. All students should have access to email and the Internet via a computer running the latest versions of Internet web browsers such as Internet Explorer or Firefox. The ¾«¶«´«Ã½app has a wireless network for on-campus students' computers. In order to take advantage of this facility and further enhance their on-campus learning environment, students should consider purchasing a notebook/laptop computer with wireless connectivity. Specialist software is required for some courses.

Back to top

Residential schools

Students are required to undertake practical and professional activities relevant to their program through enrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may be undertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only. They are a compulsory part of the program and do not attract a student contribution charge for Australian residents or a tuition fee for international students. The recommended enrolment schedule for Practice courses is shown in the Recommended Enrolment Pattern for the program in this Handbook.

External students must attend a number of residential schools during their program to obtain experience in practical and professional activities appropriate to the program. The residential schools are included in Practice courses which are conducted in Semester 3 or during the recess periods. The dates for each residential school Practice course are shown in the in this Handbook and external students should ensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protective equipment is compulsory in many engineering, construction and spatial science laboratories, students should confirm the requirements before attending residential schools for Practice courses.

Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activities and/or attend a compulsory residential school.

is to be studied in the student's penultimate year. Upon completion of , students must study and and in the same academic year.

Back to top

Exit points

Students who, for whatever reason, are unable to complete the Bachelor of Engineering (Honours) and Bachelor of Business and who satisfy all of the requirements of either the Bachelor of Engineering (Honours), the Bachelor of Engineering Science , the Associate Degree of Engineering or the may be permitted to exit with that award.

Back to top

Credit

Exemptions/credit will be assessed based on the .

Back to top

Course transfers

Students who are enrolled in either the Bachelor of Engineering (Honours) program or the Bachelor of Business program may transfer to the program with advanced standing. If they have completed up to one year of one of those programs they would normally be able to complete the program in the minimum time, after four more years of full-time study. Other students may require longer than the minimum time.

Back to top

Honours

The level of honours awarded will be determined based on the USQ procedure. Please refer to the .

Recommended enrolment pattern

Back to top

Recommended enrolment patterns

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

Due to the large number of combinations of engineering and business majors available separate recommended enrolment pattern tables are not printed in this Handbook.

Commencing on-campus students should enrol in the standard first year courses in the engineering major that they have selected. Towards the end of their first year they should consult the Faculty of Health, Engineering and Sciences for advice on the enrolment pattern to be followed in later years of the program.