¾«¶«´«Ã½app

QTAC code (Australian and New Zealand applicants): Unspecified (Toowoomba campus: 907222; External: 907225); Urban & Regional Planning (Toowoomba campus: 907232; External: 907235)

CRICOS code (International applicants): 053511E

This program is offered only to continuing students. No new admissions will be accepted. Students who are interested in this study area should consider the Bachelor of Spatial Science (Honours) which will be offered from S1 2014.

Back to top

Contact us

Back to top

Professional accreditation

The Bachelor of Spatial Science (Surveying) is fully accredited by the Surveyors Board of Queensland and is recognised in every Australian state and in New Zealand through reciprocal arrangements. The degree, together with relevant industry experience, enables registration and/or licensing as a professional surveyor with the Boards of Surveyors in Australia and New Zealand.

Provisional accreditation of the Bachelor of Spatial Science (Urban and Regional Planning will be sought from the Planning Institute of Australia during 2013.

Graduates from the Bachelor of Spatial Science are eligible to apply for membership with the

Back to top

Program aims

The Bachelor of Spatial Science program provides students with the educational requirements to become a professional spatial scientist and the ability to undertake postgraduate studies. The program equips students with a core of basic theoretical, scientific, analytical, managerial, professional, research and communication skills that will permit them to undertake an in-depth study of the fundamental science and practice of spatial science in one of three fields: Geographic Information Systems (GIS),Surveying or Urban and Regional Planning.

In addition, students obtain knowledge of the natural, legal, commercial, industrial and social environments in which they will function as professionals. The program instils in students the need for continuing professional development and gives them the ability to adapt to change.

The program is designed to identify, and award honours to, students who have the capacity to undertake study at an advanced level and to make an original contribution to the fundamental science and practice of spatial science. The award of honours will be determined by academic performance and is normally based on a student's grade point average (GPA).

Back to top

Program objectives

A student who successfully completes the Bachelor of Spatial Science should be able to demonstrate:

• a broad knowledge of basic scientific and technical skills

• a high level of computer literacy skills appropriate to their field of study

• a high level of written and oral communication skills

• a capacity for analysis, evaluation and synthesis

• an understanding of, and ability to undertake, the processes required to collect, store, and manipulate a variety of spatial data

• a capacity to adapt to change and to apply innovation

• an understanding of the natural, social, professional, industrial and technical environments in which they will practice

• a knowledge of professional journals and other information sources related to the spatial science industry, the skills required to access information from those sources, and an aptitude to undertake further learning and study

• an ability to undertake applied research in a field of the spatial science discipline

• a knowledge of the financial and management principles and practices that are used to manage a professional office

• a knowledge of surveying, spatial information systems or urban and regional planning of sufficient depth to gain employment, certification and, where appropriate, registration as a Professional Surveyor, Spatial Scientist or Planner.

Back to top

Admission requirements

Applicants shall normally:

• Geographic Information Systems and Surveying majors: have studied four semester units and achieved an exit assessment of 'Sound Achievement' or better in each of the following Queensland Senior Secondary School subjects: English and Mathematics B. It is recommended that applicants should also have satisfactorily completed the subject: Physics

• Urban and Regional Planning Major: have studied four semester units and achieved an exit assessment of 'Sound Achievement' or better in each of the following Queensland Senior Secondary subjects: English and Mathematics A.

or

• be able to demonstrate that they have achieved an equivalent standard in these subjects at another institution

and

• Australian applicants: have achieved a Queensland Overall Position (OP) band, or an equivalent Rank based on qualifications and previous work experience, at or above the specified cut-off level

All students are required to satisfy the applicable .

If you do not meet the English language requirements you may apply to study a ¾«¶«´«Ã½app-approved . On successful completion of the English language program, you may be admitted to an award program.

Back to top

Program fees

Commonwealth supported place

A Commonwealth supported place is where the Australian Government makes a contribution towards the cost of your higher education and you as a student pay a , which varies depending on the courses undertaken. You are able to calculate the fees for a particular course via the .
Commonwealth Supported students may be eligible to defer their fees through a Government loan called .

Domestic full fee paying place

Domestic full fee paying places are funded entirely through the full fees paid by the student. Full fees vary depending on the courses that are taken. You are able to calculate the fees for a particular course via the
Domestic full fee paying students may be eligible to defer their fees through a Government loan called provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealand citizens who will be resident outside Australia for the duration of their program pay full tuition fees and are not eligible for .

International full fee paying place

International students pay full fees. Full fees vary depending on the courses that are taken and whether they are studied on-campus, via distance education/online. You are able to calculate the fees for a particular course via the .

Back to top

Program structure

The Bachelor of Spatial Science is a 32-unit program consisting of Academic courses and Practice courses.

Academic courses are normally one-unit courses and involve approximately 155 hours of student work per unit.

Practice courses are zero unit courses and each involves approximately 50 hours of student work. The only grades available for a Practice Course are Pass (P) and Fail (F). A Practice Course is designed to enable students to acquire specific competencies associated with their major study. The competencies range from specific practical and communication skills through to generic competencies relating to ethical and social responsibility, awareness of the environment, teamwork, etc. For an external student a Practice Course generally involves attendance on-campus for a one-week residential school.

Back to top

Program completion requirements

The Bachelor of Spatial Science Program normally involves four years of full-time study or eight years of part-time study.

Students must complete the program within a maximum period of six years of full-time study, or 12 years of part-time study, from the date of their initial enrolment. To graduate from a particular major students must successfully complete all of the core courses plus the specialist and Practice courses in that major, including the required number of Electives.

Back to top

Required time limits

Full-time students have a maximum of six years to complete this program. Part-time students have a maximum of 12 years to complete this program.

A pro-rata adjustment of the maximum time period will apply for those students who transfer from one mode of study to another. A pro-rata reduction in the maximum time period will apply to students who are admitted to a program with advanced standing.

Back to top

Practical experience

Practical experience is desirable and encouraged but is not required for the completion of the Bachelor of Spatial Science program. Students are encouraged to obtain practical experience during vacation periods.

Back to top

IT requirements

Access to an up-to-date computer is necessary. On-campus students can access appropriately equipped laboratories, but should consider acquisition of their own computer. External students should be able to access a computer with the following as advised by the ¾«¶«´«Ã½app. All students should have access to email and the Internet via a computer running the latest versions of Internet web browsers such as Internet Explorer or Firefox. The ¾«¶«´«Ã½app has a wireless network for on-campus students' computers. In order to take advantage of this facility and further enhance their on-campus learning environment, students should consider purchasing a notebook/laptop computer with wireless connectivity. A notebook/laptop may be required for some courses.

Back to top

Residential schools

External students are required to attend a number of during their program. These are associated with Practice courses and are normally conducted at the end of Semester 3 (February), or during the mid-semester recess in Semester 2 (September/October).

Students enrolled in the external offer of a Practice Course must attend the residential school for that course. In some cases students enrolled in the on-campus mode may also be required to attend the residential school. Students should only enrol in a Practice Course when they are able to attend the residential school for that course. Practice courses may not be taken earlier than shown except with the permission of the Faculty of Health, Engineering and Sciences. In some cases students may enrol in two Practice courses in one term so they can complete the two residential schools in a two-week period. The actual dates for each residential school are shown in the in this Handbook.

Safety boots are compulsory in engineering laboratories for several of the Practice courses and are strongly recommended for all other Practice courses.

Practice courses

The majority of the practical and professional experience requirements for the program are contained within the major recommended enrolment pattern in the following table. These are zero unit courses, which are a compulsory part of the program, however they do not attract a student contribution charge for Australian Residents or a tuition fee for international students.

Elective courses

Elective courses are included in the list of Academic courses. Students should select these courses from the Electives list. Students may undertake only one appropriate level five or level eight course from this program or another program in the area of Engineering and Built Environment as an Elective with the approval of the Faculty of Health, Engineering and Sciences.

Back to top

Articulation

Graduates of an Associate Degree in Spatial Science majoring in Surveying or GIS, would normally be eligible for up to 16 units of credit towards the Bachelor of Spatial Science Technology within the same field. Similarly, Bachelor of Spatial Science Technology graduates would normally be eligible for up to 24 units of credit towards the Bachelor of Spatial Science degree within the same field. Graduates of an Associate Degree in Spatial Science majoring in Urban and Regional Planning would normally be eligible for up to 16 courses of credit towards the Bachelor of Spatial Science within the same field.

Students who have completed an associate degree or certificate program in surveying more than five years ago are eligible to claim advanced standing. The number of units of advanced standing granted will depend upon the nature and currency of the studies undertaken, and on the major study undertaken.

The programs in Surveying, Geographic Information Systems and Urban and Regional Planning also articulate to and from each other and enable students to move between Surveying, Geographic Information Systems and Regional Planning degrees, whilst still retaining a significant amount of credit.

Prospective students who wish to upgrade an existing qualification should contact the Faculty to obtain information about likely exemptions and recommended enrolment patterns for their upgrade program.

Back to top

Exit points

Students who, for whatever reason, are unable to complete the Bachelor of Spatial Science and who satisfy all of the requirements of either the Bachelor of Spatial Science Technology, the Associate Degree of Spatial Science or the may be permitted to exit with that award.

Back to top

Honours

The Bachelor of Spatial Science may be awarded with Honours. The class of honours to be awarded to a student is dependent upon:

• the Grade Point Average calculated from the grades achieved in the courses studied in, or transferred to, the program;

• the grade achieved by the student in the courses and (unless the student is exempted from these courses).

The minimum levels of achievement normally required for each class of honours are shown in the following table. To be assured of achieving a particular class of honours students must have achieved the specified grade in the research project courses and the minimum GPA requirements for all of the courses studied, for the last 16 courses studied, or for the last eight courses studied.

Recommended enrolment patterns

In this section:

• Geographic Information Systems Major recommended enrolment pattern
• Surveying Major recommended enrolment pattern
• Urban and Regional Planning major recommended enrolment pattern

Back to top

Geographic Information Systems Major recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

To satisfy the requirements of the program students must complete all of the Academic and Practice courses in the following table that shows the recommended enrolment patterns for on-campus and external students for our Toowoomba campus. Students following a non-standard enrolment pattern should consult the to ascertain if a course is offered in another term.

Geographic Information Systems Major recommended enrolment pattern

Notes

For students transferring from one program to another a complete list of enrolment requirements is available in the .
Other courses may be admissible as an Elective. However students must obtain approval from the Faculty of Health, Engineering and Sciences prior to enrolling in the course. Students may undertake only one appropriate level five or level eight course from this program or another program in the area of Engineering and Built Environment as an Elective with the approval of the Faculty of Health, Engineering and Sciences.

Back to top

Surveying Major recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

To satisfy the requirements of the program students must complete all of the Academic and Practice courses in the following table that shows the recommended enrolment patterns for on-campus and external students for our Toowoomba campus. Students following a non-standard enrolment pattern should consult the to ascertain if a course is offered in another term.

Surveying Major recommended enrolment pattern

Notes

For students transferring from one program to another a complete list of enrolment requirements are available in the .
Students may undertake only one appropriate level five or level eight course from this program or another program in the area of Engineering and Built Environment as an Elective with the approval of the Faculty of Health, Engineering and Sciences.

Back to top

Urban and Regional Planning major recommended enrolment pattern

Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of the program mode of study they enrolled in.

To satisfy the requirements of the program students must complete all of the Academic and Practice courses in the following table that shows the recommended enrolment patterns for on-campus and external students for our Toowoomba campus. Students following a non-standard enrolment pattern should consult the to ascertain if a course is offered in another term.

Urban and Regional Planning recommended enrolment pattern

Notes

For students transferring from one program to another a complete list of enrolment requirements are available in the .
Students may undertake only one appropriate level five or level eight course from this program or another program in the area of Engineering and Built Environment as an Elective with the approval of the Faculty of Health, Engineering and Sciences.