锘� Course specification for CIV1500

精东传媒app

USQ Logo
Course specification
The current and official versions of the course specifications are available on the web at .
Please consult the web for updates that may occur during the year.

CIV1500 Applied Mechanics

Semester 1, 2020 On-campus Springfield
Short Description: Applied Mechanics
Units : 1
Faculty or Section : Faculty of Health, Engineering and Sciences
School or Department : School of Civil Engineering and Surveying
Student contribution band : Band 2
ASCED code : 030903 - Structural Engineering
Grading basis : Graded

Staffing

Examiner:

Requisites

Pre-requisite or Co-requisite: ENM1500 or ENG1500 or MAT1500 or ENM1600

Other requisites

Students cannot enrol in CIV1500 if they have successfully completed CIV1501.

Synopsis

This course integrates mathematical and physics concepts to provide students with introductory mechanics knowledge to prepare them for the course CIV1501 Engineering Statics. Topics included are: length, time, mass, Newton's laws, pressure, stress, moment, torque, work, friction, two dimensional position and force vectors, particle equilibrium, resultant forces, rigid body equilibrium, centroids and second moment of areas.

Objectives

The course objectives define the student learning outcomes for a course. On completion of this course students will be able to:

  1. understand basic quantities and idealisations of mechanics and SI system of units;
  2. understand Newton's laws of motion;
  3. define pressure, stress, moment, torque, work;
  4. understand the concept of friction and analyse the equilibrium under frictional forces;
  5. express force and position in vector form and determine magnitude and direction of two dimensional vectors;
  6. analyse & solve rigid body equilibrium problems;
  7. determine the centroid of an area and the second moments of area of simple shapes.

Topics

Description Weighting(%)
1. Parameters involving length, time and mass; SI systems of Units 10.00
2. Newton鈥檚 Laws 10.00
3. Pressure, stress, moment, torque and work 10.00
4. Friction 10.00
5. Two dimensional position and force vectors 20.00
6. Rigid body equilibrium 20.00
7. Centroids & first and second moment of area 20.00

Text and materials required to be purchased or accessed

ALL textbooks and materials available to be purchased can be sourced from (unless otherwise stated). (https://omnia.usq.edu.au/textbooks/?year=2020&sem=01&subject1=CIV1500)

Please for alternative purchase options from USQ Bookshop. (https://omnia.usq.edu.au/info/contact/)

OSTDIEK ET AL 2015, CIV1500 Applied Mechanics, 1st edn.
(ISBN: 9780170365963, 215 pages.)
Scientific calculator.

Reference materials

Reference materials are materials that, if accessed by students, may improve their knowledge and understanding of the material in the course and enrich their learning experience.
Hibbeler, RC 2016, Engineering mechanics: statics study pack bundle with mastering engineering (static) with Pearson eText in SI units, 14th edn, Pearson Education, Singapore.
(ISBN 9781292089232.)
Any book on statics will be suitable to enhance students鈥� knowledge and understanding of the material in this course.

Student workload expectations

Activity Hours
Assessments 50.00
Examinations 2.00
Lectures 26.00
Private 精东传媒app 51.00
Tutorials or Workshops 26.00

Assessment details

Description Marks out of Wtg (%) Due Date Objectives Assessed Notes
ASSIGNMENT 1 200 20 30 Mar 2020 1,2,3 (see note 1)
ASSIGNMENT 2 300 30 18 May 2020 1,2,3
Take Home Exam 500 50 End S1 1,2,3,4,5,6,7 (see note 2)

Notes
  1. Online quizzes
  2. This will be an open examination. Students will be provided further instruction regarding the exam by their course examiner via 精东传媒appDesk. The examination date will be available via UConnect when the official examination timetable has been released.

Important assessment information

  1. Attendance requirements:
    It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.

  2. Requirements for students to complete each assessment item satisfactorily:
    To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks or a grade of at least C-. (Depending upon the requirements in Statement 4 below, students may not have to satisfactorily complete each assessment item to receive a passing grade in this course.)

  3. Penalties for late submission of required work:
    Students should refer to the Assessment Procedure (point 4.2.4)

  4. Requirements for student to be awarded a passing grade in the course:
    Due to COVID-19 the requirements for S1 2020 are: To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.

    Requirements after S1 2020:
    To be assured of receiving a passing grade a student must obtain at least 50% of the total weighted marks available for the course (i.e. the Primary Hurdle), and have satisfied the Secondary Hurdle (Supervised), i.e. the end of semester examination by achieving at least 40% of the weighted marks available for that assessment item.

    Supplementary assessment may be offered where a student has undertaken all of the required summative assessment items and has passed the Primary Hurdle but failed to satisfy the Secondary Hurdle (Supervised), or has satisfied the Secondary Hurdle (Supervised) but failed to achieve a passing Final Grade by 5% or less of the total weighted Marks.

    To be awarded a passing grade for a supplementary assessment item (if applicable), a student must achieve at least 50% of the available marks for the supplementary assessment item as per the Assessment Procedure (point 4.4.2).

  5. Method used to combine assessment results to attain final grade:
    The final grades for students will be assigned on the basis of the aggregate of the weighted marks/grades obtained for each of the summative assessment items in the course.

  6. Examination information:
    Due to COVID-19 the requirements for S1 2020 are: An Open Examination is one in which candidates may have access to any printed or written material and a calculator during the examination

    Requirements after S1 2020:
    Candidates are only allowed to access specific materials during a Restricted Examination. The only materials that candidates may use in the restricted examination for this course are:
    i. writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination);
    ii. calculators which cannot hold textual information (students must indicate on their examination paper the make and model of any calculator(s) they use during the examination).

  7. Examination period when Deferred/Supplementary examinations will be held:
    Due to COVID-19 the requirements for S1 2020 are: The details regarding deferred/supplementary examinations will be communicated at a later date

    Requirements after S1 2020:
    Any Deferred or Supplementary examinations for this course will be held during the next examination period.

  8. 精东传媒app Student Policies:
    Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene 精东传媒app policies and practices. These policies can be found at .

Assessment notes

  1. The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.

  2. Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.

  3. In accordance with 精东传媒app Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.

  4. Electronic submission of assessments is specified for the course. Students will be notified of this in the course Introductory Book and on the USQ 精东传媒app Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ 精东传媒app Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).

  5. The Faculty will NOT normally accept submission of assessments by facsimile or email.

  6. Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.

  7. Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.

  8. Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).

  9. Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide.


Other requirements

  1. Students will require reliable and regular access to e-mail and internet access to UConnect for this course.

Date printed 19 June 2020