精东传媒app

Staffing

Examiner:

Requisites

Pre-requisite: CIV1501 or CIV1500 or Students must be enrolled in one of the following Programs: MENS or GCEN or GEPR

Rationale

This course provides a basic introduction to Geology and Soil Mechanics.

Synopsis

All engineers working with soils and rocks must understand the range of techniques available for both identifying these materials and for determining their physical and mechanical properties. The course provides an introduction to both geology and soil mechanics. Geological information affects engineering decisions in the design and planning stages because all large scale engineering works have their foundations in rock or soil. Many projects, such as dam walls and pavements are also built from these materials. A working knowledge of geologically applied design limitations is therefore required by all engineers involved in foundation works. Students will also be introduced to the basic concepts of soil mechanics that are widely used in the design of geotechnical engineering problems such as flow nets, soil consolidation and settlement of structures. The emphasis throughout the course is placed on a practical understanding of these topics.

Objectives

Topics

Text and materials required to be purchased or accessed

Reference materials

Student workload expectations

Assessment details

Important assessment information

1. Attendance requirements:
   
   It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.
   
   
2. Requirements for students to complete each assessment item satisfactorily:
   
   Due to COVID-19 the requirements for S2 2020 are:
   To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks for that item.
   
   Requirements after S2 2020:
   To satisfactorily complete an individual assessment item a student must achieve at least 50% of the marks or a grade of at least C-. (Depending upon the requirements in Statement 4 below, students may not have to satisfactorily complete each assessment item to receive a passing grade in this course.)
   
   
3. Penalties for late submission of required work:
   
   Students should refer to the Assessment Procedure (point 4.2.4).
   
   
4. Requirements for student to be awarded a passing grade in the course:
   
   Due to COVID-19 the requirements for S2 2020 are:
   To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.
   
   Requirements after S2 2020:
   To be assured of receiving a passing grade a student must obtain at least 50% of the total weighted marks available for the course (i.e. the Primary Hurdle), and have satisfied the Secondary Hurdle (Supervised), i.e. the end of semester examination by achieving at least 40% of the weighted marks available for that assessment item.
   
   Supplementary assessment may be offered where a student has undertaken all of the required summative assessment items and has passed the Primary Hurdle but failed to satisfy the Secondary Hurdle (Supervised), or has satisfied the Secondary Hurdle (Supervised) but failed to achieve a passing Final Grade by 5% or less of the total weighted Marks.
   
   To be awarded a passing grade for a supplementary assessment item (if applicable), a student must achieve at least 50% of the available marks for the supplementary assessment item as per the Assessment Procedure (point 4.4.2).
   
   
5. Method used to combine assessment results to attain final grade:
   
   The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.
   
   
6. Examination information:
   
   Due to COVID-19 the requirements for S2 2020 are:
   An Open Examination is one in which candidates may have access to any printed or written material and a calculator during the examination.
   
   Requirements after S2 2020:
   In an Open Examination, candidates may have access to any material during the examination except the following: electronic communication devices, bulky materials, devices requiring mains power and material likely to disturb other students. Students must bring their study book to the examination. Tables contained in the study book will be needed in the examination.
   
   
7. Examination period when Deferred/Supplementary examinations will be held:
   
   Due to COVID-19 the requirements for S2 2020 are:
   The details regarding deferred/supplementary examinations will be communicated at a later date.
   
   Requirements after S2 2020:
   Any Deferred or Supplementary examinations for this course will be held during the next examination period.
   
   
8. 精东传媒app Student Policies:
   
   Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene 精东传媒app policies and practices. These policies can be found at .
   
   

Assessment notes

1. The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.
   
   
2. Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.
   
   
3. In accordance with 精东传媒app Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.
   
   
4. If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ 精东传媒app Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ 精东传媒app Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).
   
   
5. If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.
   
   
6. The Faculty will NOT normally accept submission of assessments by facsimile or email.
   
   
7. Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.
   
   
8. Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non directed personal study.
   
   
9. Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).
   
   
10. Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide.