Course specification for ELE5001

¾«¶«´«Ã½app

USQ Logo
The current and official versions of the course specifications are available on the web at .
Please consult the web for updates that may occur during the year.

ELE5001 Industrial Communications Protocols

Semester 1, 2020 On-campus Toowoomba
Short Description: Industrial Communications Prot
Units : 1
Faculty or Section : Faculty of Health, Engineering and Sciences
School or Department : School of Mechanical and Electrical Engineering
Student contribution band : Band 2
ASCED code : 031307 - Communications Technologies
Grading basis : Graded

Staffing

Examiner:

Requisites

Pre-requisite: ELE2601 or Students must be enrolled in the following Program: GCNS, GDNS, MENS or MEPR

Rationale

In order to remain competitive, industrial companies are using advanced technologies to automate their processes and operations. Seamless real-time communication between human machine interfaces (HMIs), programmable logic controllers (PLCs), sensors and actuators is essential to industrial automation. Adoption of suitable protocols ensures successful exchanges of data. There are a relatively large number of industrial communication protocols that have been developed over the last few decades. This course will help students develop the skills they will need as professional engineers to critically evaluate a given protocol and assess its suitability for different industrial applications.

Synopsis

The course focuses on industrial control networks. It builds upon knowledge and skills developed in undergraduate courses on data communication systems typically covering traditional local area network protocols such as Ethernet and higher level protocols such as TCP/IP. The major differences between industrial networks and traditional computer networks are considered in detail. Factors influencing the choice of industrial communication protocols for given applications are analysed and network performance parameters are deduced and evaluated.

Objectives

On successful completion of this course students should be able to:

  1. Explain the rationale behind the technological development of industrial networks from telemetry systems to modern SCADA systems
  2. Identify and explain the reasons behind the differences between industrial network communication protocols and the protocols used in general computer networking.
  3. Investigate the relevance and applicability of the seven layer OSI model to commonly used industrial protocols such as EthernetIP, Modbus, Profibus and DNP3
  4. Evaluate the relative strengths and weaknesses of different industrial protocols for particular applications
  5. Select an industrial protocol and use it in an application such as building services, power systems automation, water treatment and factory automation

Topics

Description Weighting(%)
1. Historical developments of industrial protocols 10.00
2. Communication protocol standards and their hardware implementation 30.00
3. Factors influencing protocol selection and performance 20.00
4. Practical network design considerations for given applications 20.00
5. Industrial Communication Network Performance Evaluation 20.00

Text and materials required to be purchased or accessed

ALL textbooks and materials available to be purchased can be sourced from (unless otherwise stated). (https://omnia.usq.edu.au/textbooks/?year=2020&sem=01&subject1=ELE5001)

Please for alternative purchase options from USQ Bookshop. (https://omnia.usq.edu.au/info/contact/)

There are no texts or materials required for this course.

Reference materials

Reference materials are materials that, if accessed by students, may improve their knowledge and understanding of the material in the course and enrich their learning experience.

Student workload expectations

Activity Hours
Assessments 40.00
Examinations 2.00
Lectures 26.00
Private ¾«¶«´«Ã½app 84.00
Tutorials 13.00

Assessment details

Description Marks out of Wtg (%) Due Date Objectives Assessed Notes
Written Assignment 1 200 20 02 Apr 2020 2,3,4
Written Assignment 2 200 20 14 May 2020 5
Online Exam 600 60 End S1 1,2,3,4,5 (see note 1)

Notes
  1. This will be an open examination. Students will be provided further instruction regarding the exam by their course examiner via ¾«¶«´«Ã½appDesk. The examination date will be available via UConnect when the official examination timetable has been released.

Important assessment information

  1. Attendance requirements:
    It is the students' responsibility to attend and participate appropriately in all activities (such as lectures, tutorials, laboratories and practical work) scheduled for them, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.

  2. Requirements for students to complete each assessment item satisfactorily:
    To satisfactorily complete an assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Students do not have to satisfactorily complete each assessment item to be awarded a passing grade in this course. Refer to Statement 4 below for the requirements to receive a passing grade in this course.

  3. Penalties for late submission of required work:
    Students should refer to the Assessment Procedure (point 4.2.4)

  4. Requirements for student to be awarded a passing grade in the course:
    Due to COVID-19 the requirements for S1 2020 are: To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.

    Requirements after S1 2020:
    To be assured of receiving a passing grade a student must obtain at least 50% of the total weighted marks available for the course (i.e. the Primary Hurdle), and have satisfied the Secondary Hurdle (Supervised), i.e. the end of semester examination by achieving at least 40% of the weighted marks available for that assessment item.

    Supplementary assessment may be offered where a student has undertaken all of the required summative assessment items and has passed the Primary Hurdle but failed to satisfy the Secondary Hurdle (Supervised), or has satisfied the Secondary Hurdle (Supervised) but failed to achieve a passing Final Grade by 5% or less of the total weighted Marks.

    To be awarded a passing grade for a supplementary assessment item (if applicable), a student must achieve at least 50% of the available marks for the supplementary assessment item as per the Assessment Procedure (point 4.4.2).

  5. Method used to combine assessment results to attain final grade:
    The final grades for students will be assigned on the basis of the aggregate of
    the weighted marks obtained for each of the summative assessment
    items in the course.

  6. Examination information:
    Due to COVID-19 the requirements for S1 2020 are: An Open Examination is one in which candidates may have access to any printed or written material and a calculator during the examination.

    Requirements after S1 2020:
    In a closed examination candidates are allowed to bring only writing and drawing instruments.

  7. Examination period when Deferred/Supplementary examinations will be held:
    Due to COVID-19 the requirements for S1 2020 are: The details regarding deferred/supplementary examinations will be communicated at a later date.

    Requirements after S1 2020:
    Any Deferred or Supplementary examinations for this course will be held during the next
    examination period.

  8. ¾«¶«´«Ã½app Student Policies:
    Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene ¾«¶«´«Ã½app policies and practices. These policies can be found at .

Assessment notes

  1. Students must familiarise themselves with the USQ Assessment Procedures (.

  2. Referencing in Assignments must comply with the Harvard (AGPS) referencing system. This system should be used by students to format details of the information sources they have cited in their work. The Harvard (APGS) style to be used is defined by the USQ library’s referencing guide. These policies can be found at

Date printed 29 June 2020