锘� Course specification for ENV2103

精东传媒app

USQ Logo
Course specification
The current and official versions of the course specifications are available on the web at .
Please consult the web for updates that may occur during the year.

ENV2103 Hydraulics I

Semester 1, 2020 On-campus Toowoomba
Short Description: Hydraulics I
Units : 1
Faculty or Section : Faculty of Health, Engineering and Sciences
School or Department : School of Civil Engineering and Surveying
Student contribution band : Band 2
ASCED code : 030999 - Civil Engineering n.e.c.
Grading basis : Graded

Staffing

Examiner:

Requisites

Pre-requisite: CIV1500 or CIV1501 or Students must be enrolled in the following Program: GCEN

Other requisites

Students cannot enrol in ENV2103 if they have successfully completed ENV1101.

Synopsis

In common with many other areas of engineering, the body of knowledge within the traditional fluid mechanics areas has expanded widely to a point where the different disciplines of engineering need different specialised knowledge. This is reflected in the acceptance of "hydraulics" or "hydraulic engineering" as a specialist field of study of prime interest to civil, mining, environmental and agricultural engineers. Since water can largely be regarded as incompressible, some of the traditional concepts of fluid mechanics need to be treated only briefly to permit a greater grounding in the types of problems encountered by hydraulic engineers. The course seeks to provide grounding in fluid statics, steady uniform and non-uniform incompressible flow in pipelines and channels, pumped systems, culvert hydraulics and flow measurement.

Objectives

The course objectives define the student learning outcomes for a course. On completion of this course, students should be able to:

  1. describe the relevant properties of fluids;
  2. calculate pressures and forces on floating and immersed bodies;
  3. undertake simple stability analyses for small gravity dams or weirs;
  4. determine the rolling stability of a prismatic floating body;
  5. analyse and design simple pipelines for steady flow;
  6. select a pump to meet a specified duty;
  7. match a pump to a pipeline system and determine the operating point of a pump;
  8. analyse pump and pipeline systems involving single and multiple pumps;
  9. solve simple steady uniform and non-uniform open channel flow problems;
  10. design rigid boundary channels;
  11. classify gradually varied flow profiles;
  12. apply the concepts of specific energy and specific force in open channel flow;
  13. design pipe and box culverts;
  14. estimate the head-discharge relationship for common flow measuring devices.

Topics

Description Weighting(%)
1. Fluid statics 20.00
2. Steady flow of incompressible fluids in pipelines 25.00
3. Pumped pipeline systems 10.00
4. Steady uniform open channel flow 25.00
5. Culvert and gravity pipeline design 10.00
6. Flow measurement 10.00

Text and materials required to be purchased or accessed

ALL textbooks and materials available to be purchased can be sourced from (unless otherwise stated). (https://omnia.usq.edu.au/textbooks/?year=2020&sem=01&subject1=ENV2103)

Please for alternative purchase options from USQ Bookshop. (https://omnia.usq.edu.au/info/contact/)

A scientific calculator which is non-programmable, that does not hold textual information and cannot display graphs.

Reference materials

Reference materials are materials that, if accessed by students, may improve their knowledge and understanding of the material in the course and enrich their learning experience.
Chadwick, AJ, Morfett, JC & Borthwick, M 2013, Hydraulics in civil and environmental engineering, 5th edn, Spon Press, London.
(Reference Material is also used in the course ENV3104 Hydraulics II.)
Hamill, L 2011, Understanding hydraulics, 3rd edn, Palgrave Macmillan, Basingstoke, Hampshire, UK.
Nalluri, C, Featherstone, RE & Marriott, M 2016, Nalluri & Featherstone's civil engineering hydraulics: essential theory with worked examples, 6th edn, Wiley Blackwell, Oxford.
(Reference material is also used in the course ENV3104 Hydraulics II.)

Student workload expectations

Activity Hours
Assessments 40.00
Examinations 2.00
Lectures 26.00
Private 精东传媒app 61.00
Tutorials 26.00

Assessment details

Description Marks out of Wtg (%) Due Date Objectives Assessed Notes
Assignment 1 150 15 25 Mar 2020 1,2,3,5
Assignment 2 150 15 29 Apr 2020 5,6,7,8
Assignment 3 100 10 27 May 2020 1,2,3
Online Exam 600 60 End S1 1,2,3,4,5,6,7,8,9,10,11,12,14 (see note 1)

Notes
  1. This will be an open examination. Students will be provided further instruction regarding the exam by their course examiner via 精东传媒appDesk. The examination date will be available via UConnect when the official examination timetable has been released.

Important assessment information

  1. Attendance requirements:
    It is the students' responsibility to attend and participate appropriately in all lectures and tutorials, and to study all material provided to them or required to be accessed by them to maximise their chance of meeting the objectives of the course and to be informed of course-related activities and administration.

  2. Requirements for students to complete each assessment item satisfactorily:
    To satisfactorily complete an assessment item a student must achieve at least 50% of the marks or a grade of at least C-. Students do not have to satisfactorily complete each assessment item to be awarded a passing grade in this course. Refer to Statement 4 below for the requirements to receive a passing grade in this course.

  3. Penalties for late submission of required work:
    Students should refer to the Assessment Procedure (point 4.2.4)

  4. Requirements for student to be awarded a passing grade in the course:
    Due to COVID-19 the requirements for S1 2020 are: To be assured of receiving a passing grade a student must achieve at least 50% of the total weighted marks available for the course.

    Requirements after S1 2020:
    To be assured of receiving a passing grade a student must obtain at least 50% of the total weighted marks available for the course (i.e. the Primary Hurdle), and have satisfied the Secondary Hurdle (Supervised), i.e. the end of semester examination by achieving at least 40% of the weighted marks available for that assessment item.

    Supplementary assessment may be offered where a student has undertaken all of the required summative assessment items and has passed the Primary Hurdle but failed to satisfy the Secondary Hurdle (Supervised), or has satisfied the Secondary Hurdle (Supervised) but failed to achieve a passing Final Grade by 5% or less of the total weighted Marks.

    To be awarded a passing grade for a supplementary assessment item (if applicable), a student must achieve at least 50% of the available marks for the supplementary assessment item as per the Assessment Procedure (point 4.4.2).

  5. Method used to combine assessment results to attain final grade:
    The final grades for students will be assigned on the basis of the weighted aggregate of the marks (or grades) obtained for each of the summative assessment items in the course.

  6. Examination information:
    Due to COVID-19 the requirements for S1 2020 are: An Open Examination is one in which candidates may have access to any printed or written material and a calculator during the examination.

    Requirements after S1 2020:
    In a Restricted Examination, candidates are allowed access only to specific materials during the examination. The only materials that candidates may use in the restricted examination for this course are: writing materials (non-electronic and free from material which could give the student an unfair advantage in the examination); a scientific calculator which is non-programmable, that does not hold textual information and cannot display graphs. Formulae sheets are provided in the exam paper.

  7. Examination period when Deferred/Supplementary examinations will be held:
    Due to COVID-19 the requirements for S1 2020 are: The details regarding deferred/supplementary examinations will be communicated at a later date.

    Requirements after S1 2020:
    Any Deferred or Supplementary examinations for this course will be held during the next examination period.

  8. 精东传媒app Student Policies:
    Students should read the USQ policies: Definitions, Assessment and Student Academic Misconduct to avoid actions which might contravene 精东传媒app policies and practices. These policies can be found at .

Assessment notes

  1. The due date for an assignment is the date by which a student must despatch the assignment to the USQ. The onus is on the student to provide proof of the despatch date, if requested by the Examiner.

  2. Students must retain a copy of each item submitted for assessment. This must be despatched to USQ within 24 hours if required by the Examiner.

  3. In accordance with 精东传媒app Policy, the Examiner may grant an extension of the due date of an assignment in extenuating circumstances.

  4. If electronic submission of assessments is specified for the course, students will be notified of this in the course Introductory Book and on the USQ 精东传媒app Desk. All required electronic submission must be made through the Assignment Drop Box located on the USQ 精东传媒app Desk for the course, unless directed otherwise by the examiner of the course. The due date for an electronically submitted assessment is the date by which a student must electronically submit the assignment. The assignment files must be submitted by 11.55pm on the due date using USQ time (as displayed on the clock on the course home page; that is, Australian Eastern Standard Time).

  5. If the method of assessment submission is by written, typed or printed paper-based media students should (i) submit to the Faculty Office for students enrolled in the course in the on-campus mode, or (ii) mail to the USQ for students enrolled in the course in the external mode. The due date for the assessment is the date by which a student must (i) submit the assessment for students enrolled in the on-campus mode, or (ii) mail the assessment for students enrolled in the external mode.

  6. The Faculty will NOT normally accept submission of assessments by facsimile or email.

  7. Students who do not have regular access to postal services for the submission of paper-based assessments, or regular access to Internet services for electronic submission, or are otherwise disadvantaged by these regulations may be given special consideration. They should contact the examiner of the course to negotiate such special arrangements prior to the submission date.

  8. Students who have undertaken all of the required assessments in a course but who have failed to meet some of the specified objectives of a course within the normally prescribed time may be awarded one of the temporary grades: IM (Incomplete - Make up), IS (Incomplete - Supplementary Examination) or ISM (Incomplete -Supplementary Examination and Make up). A temporary grade will only be awarded when, in the opinion of the examiner, a student will be able to achieve the remaining objectives of the course after a period of non-directed personal study.

  9. Students who, for medical, family/personal, or employment-related reasons, are unable to complete an assignment or to sit for an examination at the scheduled time may apply to defer an assessment in a course. Such a request must be accompanied by appropriate supporting documentation. One of the following temporary grades may be awarded IDS (Incomplete - Deferred Examination; IDM (Incomplete Deferred Make-up); IDB (Incomplete - Both Deferred Examination and Deferred Make-up).

  10. Harvard (AGPS) is the referencing system required in this course. Students should use Harvard (AGPS) style in their assignments to format details of the information sources they have cited in their work. The Harvard (AGPS) style to be used is defined by the USQ Library's referencing guide.

Date printed 19 June 2020